|
|
Since I received that .308 Heavy Barrel Mauser conversion, I have been looking for an address or phone number so I could tell you it arrived safely AND I was quite impressed with your work. I have taken it to the range one time and all the other guys remarked how nice it looked although it WAS heavy.(lol) I didn't get to shoot it much as it is a public range and crowded. I'd shoot three rounds and then have to wait for about a half hour for them to clear the range so I could check my target.
I just wanted to tell you that you really do professional work. I'll tell you one thing, that rifle is ACCURATE. All three bullets were touching at no matter what yardage -- 25 or 100 -- and it was like shooting a .223 with it's weight. I didn't even get a bruised shoulder.
Anyhow, thanks again for your tolerance while I was learning and best of luck always.
Lee
|
Mark:
The 1934 Mauser action you barreled to 338-06, the stock is a Bell and Carlson Medalist Tan Web. I glass bedded around the recoil lug, opened the barrel channel some and put on a six power Swift scope in Burris mounts. Also a picture of a five shot group at 100 yards. Hand loaded with 53 grains RL15 a 225 grain Hornady BTSP Interlock and Win. Mag. primer. Velocity 2700 fps. Brass was made from Wincheater 270 win. brass trimed to 2.484 ,O.A.L. 3.280. Can't wait to take it to South Africa in August. Will send you pictiures.
Thanks for everything
George S.
Greenville, PA
|
|
I have used Mark's services I think at least 5 times. Each and every time I was totally pleased with the results. Mark's work always impresses and performs. Each rifle he has barreled for me shoots sub MOA. I now use him exclusively and recommend him to everyone I can. Keep up the great work.
James A.
Cecilia, KY
|
Mark,
I went to the range for the first time yesterday. I could not be any more pleased! I wanted to get my scope sighted so I started at the 25 yard range. It only took 4 shots at the 25 yard range, 6 shots at the 50 yard , and 4 shots at the 100 yard range to get it totally zeroed. It fires beautifully. All assembled it is pretty heavy, which reduces the recoil significantly. With a black hogue overmolded stock, black scope rings and base, new black barrel, black action, and a nice stainless steel bolt it is taking on characteristics of a certain super villain. So, as my friend calls it, DARTH MAUSER is my new pride and joy. Thank you for putting so much pride into your work, it has really paid off. I can go into this next hunting season with confidence in a quality weapon. I have, and will continue to plug your business in the future. I will also send you pictures of my trophies (maybe you can post some of them). Thanks mark, and God bless
Matt H.
Washington D.C. |
Mark,
I purchased a M95 in 7x57 from you a couple of months ago. I finally got
it stocked and my wife shot her antelope with it just a few days ago. It
shoots very well and I am very happy with it. The 7 x 57 performed perfect. 47gr of H414 behind a 140gr Rem.CL (2750fps) it shot full length of the goat at about 95 yds. The finished rifle weight is 7.5 lbs and handles very well for my wife. I've only shot two groups with it but both were under an inch, when
time permits I'll see what it can really do.
Matt C.
Elko, NV
|
Mark,
I just wanted to say thanks, I took one of the Mausers you worked on, the
yugo k98, out to the range. It was just a joy to shoot, and did shoot some
real respectable groups. the first 3 out of the barrel, once it was sighted
in, made a half inch group. Even with the stock military trigger.
Then things went nuts.. I found out it was my mounting job on the scope
base, I had tapped the rear hole a bit large and it loosend up a bit. So, I
have to tap it a bit larger and all... but otherwise, I cant wait to get out
to the range with it. I'll send you a pic of it soon. its real purty!
Thanks Again!
Dave B.
|
| For over 3 years now I have been having Mark do all of my Mauser rebareling work
for me. He has done countless types of chamberings for me. Everything from a
243win up to a 300wm for me. Every time I have been more than pleased with his
work and is very fast on his turnaround time. The last one he did for me was a
25-06rem heavy. After getting it into the wood and about 30 rounds or so it
took a coyote at more than 600yds with factory hornady light magnums. Every one
he chambers for me shoots at least ¾” groups and most are under ½” at 100yds.
All with factory ammo!! I got a 280rem he did that shoots 1” groups at 200yds
consistently. As far as his prices go they CAN NOT be beat by anyone as yet and
I would not switch even if I did find someone cheaper. Thanks for all the great
service and technical advice and I will be back soon
John |
| I bought a rifle barrel from you and had you sporterize a Brno Mauser for me...love it love it love it...everyone that has shot it wants to keep it and not give it back. :)
This was the best expenditure of money on a firearm I have ever made and I must say thank you again. :)
Darrell
|
|
|